ipw3945
This is an old revision of the document!
Table of Contents
ipw3945
Intel Pro/Wireless 3945 Injection Walkthrough
I've tested this on Ubuntu 7.10 Gutsy and 7.04 Feisty but I don't see why it shouldn't work on other OS's.
To install ipwraw-ng,
- Download ipwraw-ng from http://homepages.tu-darmstadt.de/~p_larbig/wlan/ or http://dl.aircrack-ng.org/drivers/ (2.3.4 is the latest as of 02/11/2008)
- Install the modules and ucode
- Blacklist ipwraw (so it's not automatically loaded at boot time)
wget http://dl.aircrack-ng.org/drivers/ipwraw-ng-2.3.4-04022008.tar.bz2 tar -xjf ipwraw-ng* cd ipwraw-ng make sudo make install sudo make install_ucode echo "blacklist ipwraw" | sudo tee /etc/modprobe.d/ipwraw sudo depmod -ae
To use ipwraw-ng,
- Unload the ipw3945 module
- Load ipwraw
The device created will automatically be in monitor mode. You can use iwconfig to set the channel and rate.
sudo modprobe -r ipw3945 sudo modprobe ipwraw
And when you're done,
sudo modprobe -r ipwraw sudo modprobe ipw3945
Useful Links / Info
At this point in time, this page is far from complete. In the interim, useful information will be included here. Also do a Forum Search for additional information.
Useful links:
- Thread: Injection with ipw3945 and wifiway-0.x. Here is one message with the summarized steps using wifiway-0.X.
Also consider using the Wifi-Way live CD instead.
ipw3945.1204653553.txt.gz · Last modified: 2008/03/04 18:59 by mister_x