User Tools

Site Tools


airolib-ng

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
airolib-ng [2007/07/09 22:02]
darkaudax
airolib-ng [2019/04/15 19:07] (current)
mister_x Updated links to cowpatty
Line 1: Line 1:
 ====== Airolib-ng ====== ====== Airolib-ng ======
- 
-++++++ IMPORTANT ++++++\\ 
-++++++ IMPORTANT ++++++\\ 
-++++++ IMPORTANT ++++++\\ 
- 
-This functionality will be available in a future release. It is NOT available currently. 
- 
-++++++ IMPORTANT ++++++\\ 
-++++++ IMPORTANT ++++++\\ 
-++++++ IMPORTANT ++++++\\ 
  
 ===== Description ===== ===== Description =====
  
-Airolib-ng is a tool for the aircrack-ng suite to store and manage essid and password lists, compute their Pairwise Master Keys (PMKs) and use them in WPA/WPA2 cracking.  The program uses the lightweight sqlite3 database as the storage mechanism which is available on most platforms.  The sqlite3 database was selected taking in consideration platform availability plus management, memory and disk overhead.+Airolib-ng is an aircrack-ng suite tool designed to store and manage essid and password lists, compute their Pairwise Master Keys (PMKs) and use them in WPA/WPA2 cracking.  The program uses the lightweight SQLite3 database as the storage mechanism which is available on most platforms.  The SQLite3 database was selected taking in consideration platform availability plus management, memory and disk overhead.
  
 WPA/WPA2 cracking involves calculating the pairwise master key, from which the private transient key (PTK) is derived.   Using the PTK, we can compute the frame message identity code (MIC) for a given packet and will potentially find the MIC to be identical to the packet's thus the PTK was correct therefore the PMK was correct as well. WPA/WPA2 cracking involves calculating the pairwise master key, from which the private transient key (PTK) is derived.   Using the PTK, we can compute the frame message identity code (MIC) for a given packet and will potentially find the MIC to be identical to the packet's thus the PTK was correct therefore the PMK was correct as well.
  
-Calculating the PMK is very slow since it uses the pbkdf2 algorithm.  Yet the PMK is always the same for a given ESSID and password combination. This allows us to pre-compute the PMK for given combinations and speed up cracking the wpa/wpa2 handshake.  Tests on have shown that using this technique in [[aircrack-ng]] can check more than 30,000 passwords per second using pre-computed PMK tables.+Calculating the PMK is very slow since it uses the pbkdf2 algorithm.  Yet the PMK is always the same for a given ESSID and password combination. This allows us to pre-compute the PMK for given combinations and speed up cracking the wpa/wpa2 handshake.  Tests have shown that using this technique in [[aircrack-ng]] can check more than 50 000 passwords per second using pre-computed PMK tables.
  
 Computing the PMK is still required, yet we can: Computing the PMK is still required, yet we can:
Line 30: Line 20:
 To learn more about coWPAtty: To learn more about coWPAtty:
  
-  * [[http://www.churchofwifi.org/default.asp?PageLink=Project_Display.asp?PID=95|Church of Wifi CoWPAtty]] +  * [[https://www.willhackforsushi.com/?page_id=50|Will Hack For SUSHI > CoWPAtty]] 
-  * [[http://www.wirelessdefence.org/Contents/coWPAttyMain.htm|Wireless Defense CoWPAtty writeup]] +  * [[https://web.archive.org/web/20081217032421/http://www.wirelessdefence.org/Contents/coWPAttyMain.htm|Wireless Defense CoWPAtty writeup]]
- +
-See the code attached for more info. This is the first version posted and - if accepted - to be included into the tree. there still may be bugs and work to be done before released is marked in the code. +
- +
-To test the tool get yourself a current 1.0-dev checkout and... +
- +
-  * get yourself the sqlite3 library and headers +
-  * compile airolib-ng in src/ directory with -lsqlite3 -lssl and crypto.c +
-  * compile aircrack-ng with -DHAVE_SQLITE and -lsqlite3. This will make a new option "-r" available +
-  * create a new database file with "airolib-ng testdb init" +
-  * import some essid, e.g. "echo Harkonen | airolib-ng testdb import ascii essid -" +
-  * import some passwords, e.g. "echo 12345678 | airolib-ng testdb import ascii passwd -" +
-  * start the batch process ("airolib-ng testdb batch"), wait for it to run out of work, kill it +
-  * crack your WPA/WPA2 handshake, e.g. "aircrack-ng -r testdb -e Harkonen -q wpa2.eapol.cap"+
  
 +As stated above, this program requires the SQLite3 database environment.  You must be running version 3.3.17 or above.  You may obtain the latest version from the [[http://www.sqlite.org/download.html|SQLite download page]].
  
 ===== Usage ===== ===== Usage =====
Line 59: Line 37:
 Here are the valid operations: Here are the valid operations:
  
-  * init   Create a new database file and it's table layout. +  * - -stats  -  Output some information about the database. 
-  * stats  -  Output some information about the database. +  * - -sql {sql}  - Execute the specified SQL statement. 
-  * sql {sql}  - Execute the specified SQL statement. +  * - -clean [all]  -  Perform steps to clean the database from old junk. The option 'all' will also reduce file size if possible and run an integrity check. 
-  * clean [all]  -  Perform steps to clean the database from old junk. The option 'all' will also reduce file size if possible and run an integrity check. +  * - -batch  - Start batch-processing all combinations of ESSIDs and passwords.  This must be run prior to using the database within [[aircrack-ng]] or after you have added additional SSIDs or passwords. 
-  * batch  - Start batch-processing all combinations of ESSIDs and passwords.  This must be run prior to using the database within [[aircrack-ng]] or after you have added additional SSIDs or passwords. +  * - -verify [all]  - Verify a set of randomly chosen PMKs. If the option 'all' is given, all(!) PMKs in the database are verified and the incorrect ones are deleted. 
-  * verify [all]  - Verify a set of randomly chosen PMKs. If the option 'all' is given, all(!) PMKs in the database are verified and the incorrect ones are deleted. +  * - -export cowpatty {essid} {file}  -  Export to a cowpatty file. 
-  * export cowpatty {essid} {file}  -  Export to a cowpatty file. +  * - -import cowpatty {file}  -  Import a cowpatty file and create the database if it does not exist
-  * import cowpatty {file}  -  Import a cowpatty file. +  * - -import {essid|passwd} {file}  -  Import a text flat file as a list of either ESSIDs or passwords and create the database if it does not exist.  This file must contain one essid or password per line.  Lines should be terminated with line feeds.  Meaning press "enter" at the end of each line when entering the values.
-  * import ascii {essid|passwd} {file}  -  Import a flatfile as a list of either ESSIDs or passwords. +
  
 ===== Usage Examples ===== ===== Usage Examples =====
Line 74: Line 50:
 Here are usage examples for each operation. Here are usage examples for each operation.
  
-==== Init Operation ==== +==== Status Operation ====
- +
-You must be in the directory where you want the database created or specify the fully qualified path name.+
  
 Enter: Enter:
  
-   airolib-ng testdb init+   airolib-ng testdb --stats
  
 Where: Where:
  
   * testdb is the name of the database to be created.   * testdb is the name of the database to be created.
-  * init is the operation to be performed.+  * - -stats is the operation to be performed.
  
-The system does not respond with any output.  You can verify the database was created by doing a directly listing.+The system responds:
  
 +   statsThere are 2 ESSIDs and 232 passwords in the database. 464 out of 464 possible combinations have been computed (100%).
 +   
 +   ESSID   Priority        Done
 +   Harkonen        64      100.0
 +   teddy   64      100.0
  
-==== Status Operation ====+==== SQL Operation ==== 
 + 
 +The following example will give the SSID "VeryImportantESSID" maximum priority.
  
 Enter: Enter:
  
-   airolib-ng testdb stats+   airolib-ng testdb --sql 'update essid set prio=(select min(prio)-1 from essid) where essid="VeryImportantESSID";'
  
-Where:+The system responds:
  
-  * testdb is the name of the database to be created. +   update essid set prio=(select min(prio)-1 from essid) where essid="VeryImportantESSID"; 
-  * stats is the operation to be performed.+   Query done1 rows affected.
  
-The system responds:+The following example will look for very important patterns in the pmk.
  
-   statsThere are 2 ESSIDs and 232 passwords in the database. 464 out of 464 possible combinations have been computed (100%). +Enter:
-    +
-   ESSID   Priority        Done +
-   Harkonen        64      100.0 +
-   teddy   64      100.0+
  
 +   airolib-ng testdb --sql 'select hex(pmk) from pmk where hex(pmk) like "%DEADBEEF%"'
  
-==== SQL Operation ==== +The system responds:
- +
-Coming soon!+
  
 +   hex(pmk) BF3F122D3CE9ED6C6E7E1D7D13505E0A41EC4C5A3DEADBEEFFEFF597387AFCE3
  
 ==== Clean Operation ==== ==== Clean Operation ====
Line 119: Line 96:
 To do a basic cleaning, enter: To do a basic cleaning, enter:
  
-   airolib-ng testdb clean+   airolib-ng testdb --clean
  
 The system responds: The system responds:
Line 131: Line 108:
 To do a basic cleaning, reduce the file size if possible and run an integrity check., enter: To do a basic cleaning, reduce the file size if possible and run an integrity check., enter:
  
-   airolib-ng testdb clean all+   airolib-ng testdb --clean all
  
 The system responds: The system responds:
Line 144: Line 121:
    Query done. 2 rows affected.    Query done. 2 rows affected.
    Done.    Done.
- 
  
 ==== Batch Operation ==== ==== Batch Operation ====
Line 150: Line 126:
 Enter: Enter:
  
-   airolib-ng testdb batch+   airolib-ng testdb --batch
  
 The system responds: The system responds:
  
    Computed 464 PMK in 10 seconds (46 PMK/s, 0 in buffer). No free ESSID found. Will try determining new ESSID in 5 minutes...    Computed 464 PMK in 10 seconds (46 PMK/s, 0 in buffer). No free ESSID found. Will try determining new ESSID in 5 minutes...
- 
-IMPORTANT: You must press control-C to terminate this program once it is finished or it will continue to run indefinitely. 
- 
- 
  
 ==== Verify Operation ==== ==== Verify Operation ====
Line 164: Line 136:
 To verify a 1000 random PMKs, enter: To verify a 1000 random PMKs, enter:
  
-   airolib-ng testdb verify+   airolib-ng testdb --verify
  
 The system responds: The system responds:
Line 176: Line 148:
 To verify all PMKs, enter: To verify all PMKs, enter:
  
-   airolib-ng testdb verify all+   airolib-ng testdb --verify all
  
 The system responds: The system responds:
Line 184: Line 156:
  
  
-==== Export cowpatty Operation ==== +==== Cowpatty table Export Operation ====
- +
-++++++ IMPORTANT ++++++\\ +
- +
-This functionality will be available in a future release. It is NOT available currently. +
- +
-++++++ IMPORTANT ++++++\\ +
-++++++ IMPORTANT ++++++\\ +
-++++++ IMPORTANT ++++++\\ +
- +
-===== Description ===== +
- +
-Airolib-ng is a tool for the aircrack-ng suite to store and manage essid and password lists, compute their Pairwise Master Keys (PMKs) and use them in WPA/WPA2 cracking.  The program uses the lightweight sqlite3 database as the storage mechanism which is available on most platforms.  The sqlite3 database was selected taking in consideration platform availability plus management, memory and disk overhead. +
- +
-WPA/WPA2 cracking involves calculating the pairwise master key, from which the private transient key (PTK) is derived.   Using the PTK, we can compute the frame message identity code (MIC) for a given packet and will potentially find the MIC to be identical to the packet's thus the PTK was correct therefore the PMK was correct as well. +
- +
-Calculating the PMK is very slow since it uses the pbkdf2 algorithm.  Yet the PMK is always the same for a given ESSID and password combination. This allows us to pre-compute the PMK for given combinations and speed up cracking the wpa/wpa2 handshake.  Tests on have shown that using this technique in [[aircrack-ng]] can check more than 30,000 passwords per second using pre-computed PMK tables. +
- +
-Computing the PMK is still required, yet we can: +
-  +
-  * Precompute it for later and/or shared use. +
-  * Use distributed machines to generate the PMK and use their value elsewhere. +
- +
-To learn more about WPA/WPA2: +
- +
-  * See the [[links#wpa_wpa2_information|WPA/WPA2 Information section]] on the wiki links page. +
- +
-To learn more about coWPAtty: +
- +
-  * [[http://www.churchofwifi.org/default.asp?PageLink=Project_Display.asp?PID=95|Church of Wifi CoWPAtty]] +
-  * [[http://www.wirelessdefence.org/Contents/coWPAttyMain.htm|Wireless Defense CoWPAtty writeup]] +
- +
-See the code attached for more info. This is the first version posted and - if accepted - to be included into the tree. there still may be bugs and work to be done before released is marked in the code. +
- +
-To test the tool get yourself a current 1.0-dev checkout and... +
- +
-  * get yourself the sqlite3 library and headers +
-  * compile airolib-ng in src/ directory with -lsqlite3 -lssl and crypto.c +
-  * compile aircrack-ng with -DHAVE_SQLITE and -lsqlite3. This will make a new option "-r" available +
-  * create a new database file with "airolib-ng testdb init" +
-  * import some essid, e.g. "echo Harkonen | airolib-ng testdb import ascii essid -" +
-  * import some passwords, e.g. "echo 12345678 | airolib-ng testdb import ascii passwd -" +
-  * start the batch process ("airolib-ng testdb batch"), wait for it to run out of work, kill it +
-  * crack your WPA/WPA2 handshake, e.g. "aircrack-ng -r testdb -e Harkonen -q wpa2.eapol.cap" +
- +
- +
-===== Usage ===== +
- +
-Usage: airolib <database> <operation> [options] +
- +
-Where: +
- +
-  * database is name of the database file.  Optionally specify the full path. +
-  * operation specifies the action you would like taken on the database.  See below for a complete list. +
-  * options may be required depending on the operation specified +
- +
-Here are the valid operations: +
- +
-  * init  -  Create a new database file and it'table layout. +
-  * stats  -  Output some information about the database. +
-  * sql {sql}  - Execute the specified SQL statement. +
-  * clean [all]  -  Perform steps to clean the database from old junk. The option 'all' will also reduce file size if possible and run an integrity check. +
-  * batch  - Start batch-processing all combinations of ESSIDs and passwords.  This must be run prior to using the database within [[aircrack-ng]] or after you have added additional SSIDs or passwords. +
-  * verify [all]  - Verify a set of randomly chosen PMKs. If the option 'all' is given, all(!) PMKs in the database are verified and the incorrect ones are deleted. +
-  * export cowpatty {essid} {file}  -  Export to a cowpatty file. +
-  * import cowpatty {file}  -  Import a cowpatty file. +
-  * import ascii {essid|passwd} {file}  -  Import a flatfile as a list of either ESSIDs or passwords. +
- +
- +
-===== Usage Examples ===== +
- +
-Here are usage examples for each operation. +
- +
-==== Init Operation ==== +
- +
-You must be in the directory where you want the database created or specify the fully qualified path name.+
  
 Enter: Enter:
  
-   airolib-ng testdb init+   airolib-ng testdb --export cowpatty test cowexportoftest
  
-Where:+The system responds:
  
-  * testdb is the name of the database to be created+   exportExporting..
-  * init is the operation to be performed.+   Done.
  
-The system does not respond with any output.  You can verify the database was created by doing a directly listing. 
  
 +==== Import Operation ====
  
-==== Status Operation ==== +=== SSID === 
- +To import an ascii list of SSIDs and create the database if it does not exist, enter:
-Enter:+
  
-   airolib-ng testdb stats+   airolib-ng testdb --import essid ssidlist.txt
  
 Where: Where:
  
-  * testdb is the name of the database to be created. +  * testdb is the name of the database to be updated and it will be created if it does not exist
-  * stats is the operation to be performed.+  * - -import is the operation to be performed
 +  * essid indicates it is a list of SSIDs. 
 +  * ssidlist.txt is the file name containing the SSIDs.  One per line.  It can optionally be fully qualified.
  
 The system responds: The system responds:
  
-   statsThere are 2 ESSIDs and 232 passwords in the database464 out of 464 possible combinations have been computed (100%)+   importReading... 
-    +   Writing... 
-   ESSID   Priority        Done +   Done.
-   Harkonen        64      100.0 +
-   teddy   64      100.0+
  
 +=== Passwords ===
 +To import an ascii list of passwords and create the database if it does not exist, enter:
  
-==== SQL Operation ====+   airolib-ng testdb --import passwd password.lst
  
-Coming soon!+Where:
  
- +  * testdb is the name of the database to be updated and it will be created if it does not exist. 
-==== Clean Operation ==== +  * - -import is the operation to be performed. 
- +  * passwd indicates it is list of passwords. 
-To do basic cleaning, enter: +  * password.list is the file name. One per line. It can optionally be fully qualified.
- +
-   airolib-ng testdb clean+
  
 The system responds: The system responds:
  
-   cleanDeleting invalid ESSIDs and passwords... +   importReading... 
-   Deleting unreferenced PMKs... +   Writing... read, 1814 invalid lines ignored.
-   Analysing index structure...+
    Done.    Done.
  
 +=== Cowpatty tables ===
  
-To do basic cleaning, reduce the file size if possible and run an integrity check., enter:+Imports cowpatty table and create the database if it does not exist, enter:
  
-   airolib-ng testdb clean all+   airolib-ng testdb --import cowpatty  cowexportoftest
  
-The system responds:+Where:
  
-   cleanDeleting invalid ESSIDs and passwords..+  * testdb is the name of the database to be updated and it will be created if it does not exist
-   Deleting unreferenced PMKs... +  * - -import is the operation to be performed. 
-   Analysing index structure... +  * cowpatty indicates it is cowpatty table
-   Vacuum-cleaning the databaseThis could take while..+  * cowexportoftest is the file nameOne per lineIt can optionally be fully qualified.
-   Checking database integrity... +
-   integrity_check +
-   ok +
-   Query done. 2 rows affected. +
-   Done. +
- +
- +
-==== Batch Operation ==== +
- +
-Enter: +
- +
-   airolib-ng testdb batch+
  
 The system responds: The system responds:
  
-   Computed 464 PMK in 10 seconds (46 PMK/s, 0 in buffer)No free ESSID foundWill try determining new ESSID in 5 minutes...+   importReading header..
 +   Reading... 
 +   Updating references... 
 +   Writing...
  
-IMPORTANT: You must press control-C to terminate this program once it is finished or it will continue to run indefinitely. 
  
 +===== Aircrack-ng Usage Example =====
  
- +The ultimate objective is to speed up WPA/WPA2 cracking under [[aircrack-ng]].  To use the tables you have built using airolib-ng then use the "-r" option to specify the database containing the pre-calculated PMKs.
-==== Verify Operation ====+
  
 Enter: Enter:
  
-   airolib-ng testdb export cowpatty test cowexportoftest+   aircrack-ng  -r testdb  wpa2.eapol.cap
  
 Where: Where:
  
-  * testdb is the name of the database and may be optionally fully qualified. +  * -r specifies that a pre-computed PMK database will be used. 
-  * export cowpatty is the operation to be peformed. +  * testdb is the name of the database file and may optionally be fully qualified. 
-  * test is the SSID to be exported. +  * wpa2.eapol.cap is capture file containing the WPA/WPA2 handshake.
-  * cowexportoftest is the coWPAtty file to be created and may be optionally fully qualified.+
  
-The system responds:+Note All the other standard options which are applicable to WPA/WPA2 may also be used.  This is a very limited example.
  
-   exportExporting... 
-   Done. 
  
 +===== Usage Tips =====
  
-==== Import cowpatty Operation ====+==== Creating your own database example ====
  
-Enter:+To test the tool yourself...
  
-   airolib-ng testdb import cowpatty cowexportoftest +  * get yourself the sqlite3 library and headers (latest version is recommended) 
 +  * get yourself the 1.0dev version of the aircrack-ng suite 
 +  * import an essid, e.g. "echo Harkonen | airolib-ng testdb --import essid -"
  
-Where:+   Database <testdb> does not already exist, creating it... 
 +   Database <testdb> sucessfully created 
 +   Reading file... 
 +   Writing... 
 +   Done.
  
-  * testdb is the name of the database and may be optionally fully qualified. +  * import a password, e.g"echo 12345678 | airolib-ng testdb --import passwd -"
-  * import cowpatty is the operation to be peformed. +
-  * cowexportoftest is the coWPAtty file to be imported and may be optionally fully qualified.+
  
-The system responds: +   Reading file...
-    +
-   importReading header... +
-   Reading... +
-   Updating references...+
    Writing...    Writing...
 +   Done.
  
 +  * start the batch process ("airolib-ng testdb --batch"), wait for it to run out of work or pause it with Ctrl-C
  
-==== Import ascii Operation ====+   Computed 1 PMK in 0 seconds (1 PMK/s, 0 in buffer). All ESSID processed.
  
-To import an ascii list of SSIDs, enter:+  * Check the database to confirm everything has been computed ("airolib-ng testdb --stats")
  
-   airolib-ng testdb import ascii essid ssidlist.txt+   There are 1 ESSIDs and 1 passwords in the database1 out of 1 possible combinations have been computed (100%). 
 +    
 +   ESSID   Priority        Done 
 +   Harkonen        64      100.0
  
-Where:+  * crack your WPA/WPA2 handshake, e.g. "aircrack-ng -r testdb -e Harkonen wpa2.eapol.cap"
  
-  * testdb is the name of the database to be updated and this must already exist. +   KEY FOUND! [ 12345678 ]
-  * import ascii is the operation to be performed. +
-  * essid indicates it is a list of SSIDs. +
-  * ssidlist.txt is the file name containing the SSIDs.  One per line.  It can optionally be fully qualified.+
  
-The system responds: 
  
-   importReading... 
-   Writing... 
-   Done. 
  
 +==== Using a sample pre-made database ====
  
-To import an ascii list of passwords, enter:+Another way to test for yourself is to download a pre-made database called [[http://download.aircrack-ng.org/wiki-files/other/passphrases.db|passphrases.db]].  This  file is also located in the test directory of the aircrack-ng sources. Then try this database with the two test WPA/WPA2 files supplied in the test directory of the aircrack-ng sources.  The WPA/WPA2 test files are called "wpa.cap" and "wpa2.eapol.cap".
  
-   airolib-ng testdb import ascii passwd password.lst+The commands are either of:
  
-Where:+   aircrack-ng -r passphrases.db wpa.cap 
 +   aircrack-ng -r passphrases.db wpa2.eapol.cap
  
-  * testdb is the name of the database to be updated and this must already exist. +This should give you the passphase.  Success indicates that your setup is working correctly.
-  * import ascii is the operation to be performed. +
-  * passwd indicates it is a list of passwords. +
-  * password.list is the file name.  One per line.  It can optionally be fully qualified.+
  
-The system responds: 
  
-   importReading... +===== Usage Troubleshooting =====
-   Writing... read, 1814 invalid lines ignored. +
-   Done.+
  
  
-===== Aircrack-ng Usage Example =====+==== Enabling Airolib-ng ==== 
 +Airolib-ng is not compiled by default.  To enable compiling, do "make sqlite=true" and "make sqlite=true install".
  
-The ultimate objective is to speed up WPA/WPA2 cracking under [[aircrack-ng]].  To use the tables you have built using airolib-ng then use the "-r" option to specify the database containing the pre-calculated PMKs.+==== Compile Error ==== 
 +Although this is not a usage troubleshooting tip, it is a common problem during the compilation of the 1.0dev version.  As a reminder, SQLite must be version 3.3.13 or above.  This is the compile error you receive when your version of SQLite is less then the requirement:
  
-Enter:+  gcc -g -W -Wall -Werror -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=`../evalrev` -I/usr/local/include -Iinclude -DHAVE_SQLITE   -c -o airolib-ng.o airolib-ng.c 
 +  airolib-ng.cIn function `sql_prepare': 
 +  airolib-ng.c:129: warning: implicit declaration of function `sqlite3_prepare_v2' 
 +  make[1]: *** [airolib-ng.o] Error 1 
 +  make[1]: Leaving directory `/root/1.0-dev/src' 
 +  make: *** [all] Error 2 
 +   
 +==== When is the SQLite patch needed? ====
  
-   aircrack-ng  -r testdb  wpa2.eapol.cap+The SQLite patch included with aircrack-ng sources is only needed when compiling under Windows.  It is required to remove some elements which will not compile under windows and are not required.
  
-Where:+It is not required for linux installations.
  
-  * -r specifies that a pre-computed PMK database will be used. +==== Airolib-ng fails to open or create the database ====
-  * testdb is the name of the database file and may optionally be fully qualified. +
-  * wpa2.eapol.cap is capture file containing the WPA/WPA2 handshake.+
  
-Note:  All the other standard options which are applicable to WPA/WPA2 may also be used.  This is very limited example.+On windows only, opening/creating database doesn't work when airolib-ng is in directories containing special characters like 'ç', 'é', 'è', 'à', ... (directories containing spaces are not affected).
  
 +The solution is to move airolib-ng and its database in another directory without these special characters.
  
-===== Usage Tips =====+==== "invalid lines ignored" error message ====
  
-None at this time.+This error message may occur when importing passwords or ESSIDs  It is the number of records with invalid passwords or ESSIDs lengths.  The valid lengths are:
  
 +  * Passwords must have a length of 8 through 63 characters
 +  * ESSIDs must have a length of 1 through 32 characters
  
-===== Usage Troubleshooting ===== +==== "Quitting aircrack-ng..." error message ====
- +
-None at this time.+
  
 +If you subsequently run aircrack-ng and only receive "Quitting aircrack-ng..." then the ESSID is missing from the database.  You need to load it plus rerun the batch option.
  
airolib-ng.1184011379.txt.gz · Last modified: 2007/07/09 22:02 by darkaudax